FINAL
IMPRESSIONS
Get
a detailed impression since the final processed
baseplate will be made from this impression.
|
Pouring Model
If
you pour your own models, make sure that the
land areas are no greater than 1mm above depth
of sulcus. Carve the post-dam in the master model
if not included in the impression.
|
Select
Denture Base Shade
When
you write up the work order, specify Eclipse
and indicate the Lucitone® denture base shade
desired (original, light pink, light redish-pink,
dark pink or clear).
|
ADJUST
BASEPLATE FOR FINAL FIT
Evaluate baseplate for:
|
OCCLUSAL
RECORDS
Adjust the wax rims to indicate:
|
TRY-IN
Try-In
will be sent to you in a light-safe bag. Keep
it in the bag when not fitting or adjusting the
appliance.
At try-in, the uncured denture (insert left) has a distincively
different color than the final cured denture (insert right).
|
TRY-IN
Making Adjustments
If
changes are necessary at chairside, use a heated
water bath (110°F/40°C), NOT a Bunsen
burner, to soften material to allow change. Move
the resin. Do not push on the teeth.
Communicate tooth position changes to your lab prior to final
processing.
|
TRY-IN
Adding Volume to Gingival Areas
If
desired, add volume to the gingival areas with
silicone putty. Do not use wax.
Taking New Bite Registration
If occlusion is not acceptable, posterior teeth can be removed
for a new bite registration. Use silicone putty for new bite registration
material. Do not use wax.
Return
try-in to laboratory in the light-safe bag for
adjustments or processing.
|
DELIVERY
If
necessary at delivery, adjust denture base using
normal procedures.
Eclipse can be relined or repaired using Eclipse or conventional
acrylic resins.
|
